D8568A LH3r PIII 550 Netserver

Hewlett Packard LH3r Server D8568A, PIII 550 128MB SDRAM no HD. The HP Netserver LH3 is a powerful departmental server you can rely on today and grow with tomorrow. Includes a full array of high availability features for maximum uptime. Features flexibility, expandability and extraordinary performance.

• Dual Intel® Pentium® III processors at 400 MHz to 600 and 100MHz bus.

• Integrated dual-channel RAID controller

• Up to 12 hot-swap hard drive bays

• Best-in-class reliability and uptime—with fully hot-swappable/hot-pluggable components, including disk drives, power supplies, fans, and hot-plug PCI slots

Call For Availability

LH3 Features

KEY FEATURES AT A GLANCE:

Supports up to two Intel Pentium III processors to 600MHz (one 550MHz provided standard) with 100 MHz front-side bus.

Tool-free upgrade to optional four-way Intel Pentium III Xeon processing (in stock at e4 Services if desired)

Capacity for up to 12 Ultra2 SCSI Hot Swap drives (Optionally available) and two common tray drives (two hot swap drives installed) driven by an integrated dual-channel HP NetRAID controller with I2O

Expandable up to 4GB memory capacity with registered ECC SDRAM and memory scrubbing (128MB standard)

Hot-swap power supplies and fans, Redundant Power Supply Optoinal.

Automatic hardware-level IRQ re-directs using HP's Smart IRQ technology to ease configuration and boost performance

Supports industry-leading DAT or DLT technology.

Integrated HP Remote Assistant and optional HP TopTools Remote Control card provide the easiest remote access, advanced security and diagnostics

Storage:
32X Max EIDE CD-ROM drive
3.5" 1.44MB flexible disk drive
6 Optional Hot Swap Hard Disk Drive

Network Controller:
Preinstalled 10/100TX network interface card with support for optional network interface card to support redundancy, load balancing, and Cisco Fast EtherChannel

Expansion Slots:
8 total 32-bit full-length PCI (one occupied by preinstalled 10/100TX NIC, 1 shared with 2/3 length ISA)

Storage Controller:
Integrated dual-channel HP NetRAID disk array controller with I2O

Video:
Integrated: supports 1024x768, 256-color resolution at 60-75Hz
1MB standard video memory, upgradable to 2MB
Super VGA drivers available with operating system

Power Supply:
550 Watts

Form Factor:
Rack Mount

Operating System:
None installed or included

Processor

Intel Pentium III 550MHz with 100MHz bus (dual capability to 600MHz and optional tool-free upgrade to optional four-way Intel Pentium III Xeon processing available after auction)
256KB ECC Level 2 cache memory per processor

Memory

Standard: 128mM high-performance 100MHz ECC SDRAM with memory scrubbing
Maximum: 4 GB

Upgradability

Tool-free access and interchangeable side covers
All major assemblies easy to remove for upgrades or repair
Simple conversion from pedestal to rack configuration
Physically compatible with standard 19-inch racks

Hard Disk Drive

Open bay - none installed or included
Supports 4.2GB, 9.1 GB, and 18.2GB (7200 rpm) Ultra2 SCSI disk drives
Supports 18.2GB, 36GB, 72GB, 146GB and 300GB(10,000 and 15,000rpm) Ultra3 SCSI disk drives
Hot-swap and hot-spare support

4 front-accessible (half-height) shelves
- One 3.5-inch flexible disk drive
- One CD-ROM
- Two common tray (non-hot-swap) shelves, suitable
for drives or tape backup (DLT, DDS, autoloader) (One drive installed)

12 front-accessible hot-swap shelves
- 6 low-profile standard (also supports 4 half-height
or mixed low-profile and half-height)
- 6 additional low-profile (or 4 half-height) with
optional cage for full duplex capability

Storage

One 1.44MB 3.5-inch flexible disk drive
One 32X CD-ROM
Two 18GB Hot Swap Hard Disk Drive installed)

Network Controller

Preinstalled 10/100TX network interface card with support for optional network interface card to support redundancy, load balancing, and Cisco Fast EtherChannel

Bus Speed

100MHz

Expansion Slots

8 total 32-bit full-length PCI (one occupied by preinstalled 10/100TX NIC, 1 shared with 2/3 length ISA)

Storage Controller

Integrated dual-channel HP NetRAID disk array controller with I2O
Integrated dual Ultra2 SCSI controllers
Additional Ultra2 to SE (single-ended) converter

Video

Integrated: supports 1024x768, 256-color resolution at 60-75Hz
1MB standard video memory, upgradable to 2MB
Super VGA drivers available with operating system

Power Supply

2-550 Watts, with option for redundancy kit, 3rd supply for hot swap availability

Form Factor

Rack Mount : 350.5mmW x 494.8mmH x 724.2mmD

Operating System

None installed or included

HP NetServer LH3000 -- setting performance marks for your best choice in a workgroup server!

Notice
Monitor not included

Requirements
Needs operating system

Warranty
3 years from manufacturer

Package Contents
CPU, Power Cord